Reversible table runner how to
I have been anxious to make a tablerunner for our coffee table, which may or may not have some paint splatters on it. *Ahem*
I made a very simple one that is a great use of fat quarters in your stash – I used 5 fat quarters for the front, the remnants of those 5 fat quarters and scraps from my stash for the back.
Here, a step by step guide.
1. Choose 5 fat quarters that have a complementary theme. Iron fabric.
2. From each fat quarter, cut 3 4-inch by 18-inch strips.
3. Lay strips by color side by side. Grab one strip from each pile. This is your first set. For the next set, start with the second pile in and grab five, making the first strip be your last. For your third set, pick the strip from the third pile to start your pile. So your piles will be in this order: 1,2,3,4,5; 2,3,4,5,1; 3,4,5,1,2.
4. Sew the five strips in your new piles together. Spread seams open, iron flat. You should have three sets when you are done, measuring about 18X18 inches after seam allowances.
5. Cut 4 inch wide strips from fabric (in the direction that will make 4X4 inch blocks of 5 colors, all sewn together). You should be able to cut 4 from each of the 3 panels, leaving 12 strips and small scraps of fabric at the end.
6. Pick a pattern to make with these strips. For our table runner, I did 1,2,3,2,1,2,3,2,1. This left me with three strips leftover, which I used on the back. More on this later.
Sew strips together. Open seams, press flat.
7. From leftover fat quarters, create border. For the skinny edges, I cut 2 strips that are 4 inches by 18 inches, 1 each from 2 of the remaining fat quarters. This made the long side 39 inches long, so I cut 13.5 inch X 4 inch strips from the 3 remaining fat quarters, 2 from each colors. I staggered the colors for the edge so that the same fabrics weren’t right across from each other. Sew on sides, open seams, press flat.
Your top is done!
8. Make your backing. For the back, I pieced leftover strips and leftover scraps of fabric until I created a top that measured the same size. For a less time consuming alternative, you can just do one solid fabric backing. If you choose to piece as you go, then you have a reversible table runner.
9. Place right sides together of both front and back, pin together. Sew around all 4 sides, leaving three inches unsewn in order to turn right side out.
10. Fold in edges of remaining three inches, sew shut either by hand or machine. Sew around the runner 1/2 inch in from the edge to finish. And you’re done!
Entry filed under: affordable craft, decorating, handsewn, quilting, sewing. Tags: decor, decorating, fabric, fat quarter project, fat quarters, free how to, free pattern, home decorating, how to, pattern, quilt, quilter, quilting, quilts, scrap project, sew, sewing, table cloth, table runner.